Dynamic Systems Inc. and Stony Brook University Announce Beta Trial of Ultra-High-Temperature Testing System for Advanced Materials Research
MWN-AI** Summary
Dynamic Systems Inc. (DSI), a subsidiary of Vishay Precision Group Inc. (NYSE: VPG), together with Stony Brook University (SBU), has launched a beta trial for its innovative Ultra High Temperature Ceramic and Composite (UHTC) testing system. This groundbreaking system allows for the testing of ceramics and non-conductive materials at temperatures exceeding 2000°C, addressing a critical need for advanced materials research under extreme conditions.
Housed within SBU’s Fracture Analysis and Creep at Elevated Temperatures (FACET) laboratory as part of the Advanced Energy Research and Technology Center (AERTC), the UHTC system will play an essential role in research on high-performance materials, particularly those applicable to fusion energy and substantial technological innovations.
Michal Kinch, SBU's Chief Innovation Officer, emphasized the system's capacity to enhance the characterization of materials at ultra-high temperatures—a crucial aspect in developing next-generation energy technologies. The UHTC system features several advanced capabilities, including precision temperature control for accurate measurements, rapid thermal cycling to replicate real-world conditions, and enhanced experimental throughput—potentially up to ten times faster than traditional systems.
Dr. Nick Moelders, President of DSI, expressed enthusiasm for the collaboration with SBU, stating that this phase of the UHTC system's development is vital for validating its effectiveness for broader research community use. The feedback collected during the trial will not only accelerate the development of the UHTC but also support SBU’s mission to innovate advanced simulation techniques for material creation.
By leveraging the testing capabilities of the UHTC system, researchers anticipate significant advancements in materials science, directly influencing sectors such as aerospace, automotive, and energy.
MWN-AI** Analysis
Dynamic Systems Inc. (DSI), a subsidiary of Vishay Precision Group Inc. (NYSE: VPG), is positioned at a promising intersection of advanced materials research and energy solutions following its recent announcement of the beta trial of its Ultra High Temperature Ceramic and Composite (UHTC) testing system. This strategic partnership with Stony Brook University (SBU) enhances DSI’s capabilities in materials testing and aligns well with the burgeoning demand for advanced materials in sectors such as fusion energy, aerospace, and defense.
The UHTC system's ability to test materials at temperatures exceeding 2000°C, combined with precision temperature control and rapid thermal cycling, provides significant advantages over conventional systems. The potential for a tenfold increase in testing throughput is particularly noteworthy, hinting at a transformational shift in research methodologies within the field. This rapid advancement could attract academic and industrial partnerships, fundamentally bolstering DSI's market position.
Investors should consider the implications of DSI's innovations in the context of its parent company, VPG. As the demand for next-generation materials continues to grow, particularly in the energy sector, the collaboration with SBU places DSI firmly within the value chain of high-tech industries increasingly focused on sustainable and efficient energy solutions.
Additionally, with a history of reliability established through the Gleeble testing series, DSI builds upon its reputation while venturing into new market segments. The focus on cross-disciplinary innovation indicates a potential for diversified revenue streams and expanded market opportunities.
However, potential investors should remain vigilant regarding execution risks in scaling the UHTC system and securing ongoing partnerships. As the company continues to validate this new technology, monitoring market responses will be crucial. In summary, Dynamic Systems Inc. presents a compelling opportunity for investors looking for exposure to the advanced materials research sector, backed by robust technological advancements and strategic collaborations.
**MWN-AI Summary and Analysis is based on asking OpenAI to summarize and analyze this news release.
POESTENKILL, N.Y., Sept. 29, 2025 (GLOBE NEWSWIRE) -- Dynamic Systems Inc. (DSI), a subsidiary of Vishay Precision Group Inc. (NYSE: VPG), and Stony Brook University (SBU) announced today a beta evaluation of DSI’s Ultra High Temperature Ceramic and Composite (UHTC) testing system. The system enables the testing of ceramics and other non-conductive materials at temperatures exceeding 2000°C, providing researchers with new capabilities for studying the performance of advanced materials under extreme conditions.
The ASTM-compliant UHTC system will be housed in SBU’s Fracture Analysis and Creep at Elevated Temperatures (FACET) laboratory, part of the Advanced Energy Research and Technology Center (AERTC) . It will play a central role in research programs focused on next-generation high-performance materials, including those being developed for fusion energy and other demanding applications.
“At the AERTC, our mission is to advance solutions to some of the most complex challenges in energy and sustainability,” said Michal Kinch, Chief Innovation Officer at Stony Brook University. “Collaborating with DSI to evaluate the UHTC system significantly expands our ability to characterize materials at ultra-high temperatures, a critical requirement for the development of new energy technologies.”
The UHTC system builds on the foundation of DSI’s widely adopted Gleeble® thermal-mechanical simulator, used globally for alloy development and materials science research. By extending those capabilities to ceramics and composites, the UHTC system introduces:
- Precision temperature control ensures accurate measurement and reproducibility.
- Rapid thermal cycling to simulate real-world environments .
- Cross-Disciplinary innovation supporting new applications.
These features provide a step-change in experimental throughput—up to 10X faster than conventional systems—while maintaining the accuracy and reliability required for advanced research.
“We are pleased to collaborate with Stony Brook University in this critical stage of the UHTC system’s development,” said Dr. Nick Moelders, President, Dynamic Systems Inc. “This beta system is the second in our program, following our collaboration with the University of Alabama, and is an important milestone in validating the system for broad use in the research community. Our collaboration with SBU accelerates UHTC system development with real-world research feedback while advancing SBU’s mission to create next-generation materials through advanced simulation.”
About AERTC at Stony Brook University
The Advanced Energy Center (AERTC) is located in the Research & Development Park at Stony Brook University and is a true partnership of academic institutions, research institutions, energy providers and industrial corporations. The Center's mission is innovative energy research, education and technology deployment with a focus on efficiency, conservation, renewable energy and nanotechnology applications for new and novel sources of energy.
About Dynamic Systems Inc.
Dynamic Systems Inc. (DSI) is a global leader in materials testing technology. For decades, DSI has delivered world-class testing solutions through the Gleeble series, empowering researchers and engineers to push the boundaries of materials science in industries such as aerospace, automotive, defense, and energy. For more information on Dynamic Systems and the Gleeble, please contact: info@gleeble.com or visit https:// gleeble.com .
About VPG
Vishay Precision Group, Inc. (VPG) is a leader in precision measurement and sensing technologies. Our sensors, weighing solutions and measurement systems optimize and enhance our customers’ product performance across a broad array of markets to make our world safer, smarter, and more productive. To learn more, visit VPG at www.vpgsensors.com and follow us on LinkedIn .
Contacts:
Don Olzowy
Dynamic Systems Inc.
Tel: (518) 283-5350 x262
Email: don.olszowy@gleeble.com
Lance Snead
CEAS Dean’s Fellow for Research - SBU
Email: lance.snead@stonybrook.edu
Steve Cantor
Vishay Precision Group (VPG)
Email: info@vpgsensors.com
“Gleeble” is a registered trademark of Dynamic Systems Inc. A VPG Brand
© 2025 VPG - All Rights Reserved
A photo accompanying this announcement is available at https://www.globenewswire.com/NewsRoom/AttachmentNg/5bd00363-6343-4472-befd-b9bd6102e5f6
FAQ**
How will the UHTC testing system developed by Dynamic Systems Inc. (a subsidiary of Vishay Precision Group Inc. VPG) enhance research capabilities in the development of high-performance materials for fusion energy applications?
What specific advantages does the beta evaluation of the UHTC testing system at Stony Brook University provide for researchers working under the auspices of Vishay Precision Group Inc. VPG?
With the UHTC system offering experimental throughput up to 10X faster than conventional methods, how do you anticipate this will impact the materials science industry, particularly in sectors related to Vishay Precision Group Inc. VPG?
How does collaboration with Stony Brook University fit into the broader strategy of Vishay Precision Group Inc. VPG to foster innovation in advanced materials and energy technologies?
**MWN-AI FAQ is based on asking OpenAI questions about Vishay Precision Group Inc. (NYSE: VPG).
NASDAQ: VPG
VPG Trading
0.65% G/L:
$101.65 Last:
689,707 Volume:
$99.60 Open:
