Keysight Unveils Next-Generation In-Vehicle Network Test Solutions at Automotive Ethernet Congress 2026
MWN-AI** Summary
Keysight Technologies, Inc. (NYSE: KEYS) showcased its latest automotive Ethernet receiver compliance test solutions at the Automotive Ethernet Congress (AEC) 2026 in Germany, highlighting advancements in mission-critical receiver testing for the future of in-vehicle networks. As automobiles increasingly adopt software-defined and data-intensive architectures, automotive Ethernet is evolving to support higher bandwidth, enhanced reliability, and scalable network structures. This paradigm shift necessitates robust receiver (Rx) testing to ensure the safety and reliability of next-generation automotive platforms.
At AEC, Keysight unveiled two innovative testing solutions. The first, the 10BASE-T1S Receiver Test Solution, is designed for emerging multi-drop 10BASE-T1S Ethernet architectures, catering to zonal and edge-controller applications. This solution, developed in partnership with BitifEye Digital Test Solutions GmbH, enables comprehensive automated receiver tests that validate compliance with established standards, perform Bit Error Rate (BER) verification under various conditions, and facilitate multi-drop network test capabilities for scalable architecture validation.
The second offering is the nGBASE-AU Optical Automotive Ethernet test solution, tailored to address the evolving demands of future in-vehicle networks for increased bandwidth, electromagnetic interference (EMI) resilience, and long-reach communication. This solution complies with IEEE 802.3cz Amendment 7 and includes a suite of measurements for advanced signal quality assessment.
Thomas Goetzl, Vice President and General Manager of Keysight's Automotive & Energy Solutions, emphasized the critical importance of resilient, high-speed Ethernet communication in modern vehicle architectures. His remarks underscore that these new tools are essential in propelling innovation and ensuring industry compliance. Keysight's demonstrations and experts are available for further insights at booth B-07 during the congress.
MWN-AI** Analysis
Keysight Technologies, Inc. (NYSE: KEYS) has unveiled its next-generation in-vehicle network test solutions at the Automotive Ethernet Congress 2026, highlighting its commitment to enhancing automotive communications. This move comes at a crucial time as the industry increasingly shifts toward software-defined vehicles and data-driven architectures, signaling a major opportunity for growth in automotive Ethernet technologies.
The introduction of the 10BASE-T1S Receiver Test Solution and the nGBASE-AU Optical Automotive Ethernet test solution positions Keysight to capitalize on the rising demand for high-speed, reliable communication systems in vehicles. As cars evolve to rely more on Ethernet networks for various applications, the need for robust testing solutions to ensure compliance and performance under various conditions becomes paramount.
Investors should note that the automotive sector is under considerable pressure to innovate. Keysight’s solutions address critical challenges pertaining to bandwidth, reliability, and security, placing the company at the forefront of this evolution. The ability to provide scalable, compliant, and resilient testing solutions will likely enhance Keysight's solid reputation as a leader in the market.
The continuing adoption of electric and autonomous vehicles will further amplify the reliance on sophisticated in-vehicle networking. As such, Keysight's commitment to automotive Ethernet testing solutions not only aligns with current market demands but also anticipates future trends.
From a market perspective, Keysight is well-positioned to leverage these advancements to drive revenue growth in a burgeoning sector. Investors may consider accumulating positions in KEYS, particularly given its strategic innovations that align with long-term industry shifts towards high-speed, data-intensive automotive networks. Monitoring Keysight's progress and adoption rates of these solutions will be crucial for assessing its future growth trajectory.
**MWN-AI Summary and Analysis is based on asking OpenAI to summarize and analyze this news release.
Advances mission-critical receiver testing to address the reliability and safety of future in-vehicle networks
Keysight Technologies, Inc. (NYSE: KEYS) will demonstrate new automotive Ethernet receiver compliance test solutions at the Automotive Ethernet Congress (AEC) in Germany (booth B-07). The new solutions are designed to support validation from 10BASE-T1S to 10GBASE-T1, enabling automakers and suppliers to accelerate the transition to high?speed zonal architecture and software?defined vehicles.
As vehicles become increasingly software-defined and data-intensive, automotive Ethernet is rapidly evolving to support higher bandwidth, improved reliability, and scalable network architectures. As a result, receiver (Rx) testing has emerged as a mission?critical requirement to ensure the reliability and safety of next?generation automotive platforms.
To address these challenges, Keysight will showcase two new testing solutions at AEC. Keysight’s 10BASE?T1S Receiver Test Solution supports emerging multi?drop 10BASE-T1S Ethernet architectures for zonal and edge-controller applications. Keysight will also demonstrate its nGBASE?AU Optical Automotive Ethernet test solution , purpose?built to address the increasing bandwidth, EMI resilience, and long?reach communication requirements of future in?vehicle networks.
The 10BASE?T1S Receiver Test Solution, developed in collaboration with BitifEye Digital Test Solutions GmbH, delivers the following benefits:
- Comprehensive automated receiver compliance test software that executes receiver validation for PHY compliance with Open Alliance TC14 PMA Test Suite 5.2.1 specification.
- Receiver BER verification under impaired channel and coupled-noise conditions, enabled by the new 10BASE-T1S media converter, ringing board, and MDI adapters.
- Multi?drop network test capabilities enable validation of scalable zonal architectures.
Keysight’s nGBASE?AU optical physical-layer testbed delivers the following benefits:
- Full compliance with IEEE 802.3cz Amendment 7, 2023 and Open Alliance TC7 test house specifications.
- TDFOM measurement suite (including TDFOM OMA, ER, AOP, and OAR) for advanced signal quality assessment.
- Supported oscilloscope models include Keysight DCA-M model N1092A / N1092C , with clock recovery via Keysight N1077B .
- Intuitive test automation interface on FlexDCA, enabling both conformant and developer test configurations.
Thomas Goetzl, Vice President and General Manager of Keysight's Automotive & Energy Solutions, said: “As vehicle architectures become more software-driven and data?intensive, the need for resilient, high?speed Ethernet communication is more critical than ever. The launch of the 10BASE?T1S receiver test portfolio and Keysight nGBASE?AU optical solution equips the automotive industry with the tools needed to accelerate innovation and ensure robust, standards?compliant performance.”
Keysight’s demonstrations and experts will be available throughout AEC at booth B-07.
Resources
- Product Page: nGBASE-AU optical automotive Ethernet
- Product Page: 10BASE-T1S receiver test
About Keysight Technologies
At Keysight (NYSE: KEYS), we inspire and empower innovators to bring world-changing technologies to life. As an S&P 500 company, we’re delivering market-leading design, emulation, and test solutions to help engineers develop and deploy faster, with less risk, throughout the entire product life cycle. We’re a global innovation partner enabling customers in communications, industrial automation, aerospace and defense, automotive, semiconductor, and general electronics markets to accelerate innovation to connect and secure the world. Learn more at Keysight Newsroom and www.keysight.com .
View source version on businesswire.com: https://www.businesswire.com/news/home/20260325158616/en/
Keysight Media Contacts
Andrea Mueller
Americas
andrea.mueller@keysight.com
Fusako Dohi
Asia
fusako_dohi@keysight.com
Jenny Gallacher
Europe
jenny.gallacher@keysight.com
FAQ**
How does Keysight Technologies Inc. (NYSE: KEYS) plan to leverage its new automotive Ethernet receiver test solutions to enhance the reliability and safety of future in-vehicle networks?
What unique features do the 10BASE-T1S Receiver Test Solution and nGBASE-AU optical solution offer that differentiate Keysight Technologies Inc. (NYSE: KEYS) from its competitors in automotive testing?
In what ways will the compliance with IEEE 802.3cz Amendment 7, 2023 help Keysight Technologies Inc. (NYSE: KEYS) meet the evolving needs of the automotive industry for high-speed Ethernet communication?
Can you elaborate on how the collaboration with BitifEye Digital Test Solutions GmbH benefits Keysight Technologies Inc. (NYSE: KEYS) in developing the 10BASE-T1S Receiver Test Solution?
**MWN-AI FAQ is based on asking OpenAI questions about Keysight Technologies Inc. (NYSE: KEYS).
NASDAQ: KEYS
KEYS Trading
-0.38% G/L:
$322.41 Last:
352,825 Volume:
$323.91 Open:
